Call register (Menu 2)
In this menu, you can check and erase phone numbers of calls that you have
missed (Menu 2-1), received (Menu 2-2) or dialled (Menu 2-3). Note that the
Received calls and Missed calls functions are network services which work
only in networks that allow you to view the caller’s phone number.
Note: The communicator only
registers missed calls when the
phone is switched on and
within network coverage.
Um_spock3.bk Page 142 Thursday, June 1, 2000 10:11 AM
143
©2000 Nokia Mobile Phones. All rights reserved.
Erase recent call lists (Menu 2-4)
Caution: The phone numbers are erased without warning. You cannot undo
the operation.
Show call duration (Menu 2-5)
In this menu, you can view the duration of your outgoing and incoming calls
and reset the timers.
Last call duration (Menu 2-5-1)
Shows the duration of the last outgoing or incoming call in hours, minutes
and seconds, e.g. 00:02:15.
All calls’ duration (Menu 2-5-2)
Shows the total duration of all calls made or received with any SIM card
that you have used with the communicator.
Received calls’ duration (Menu 2-5-3)
Shows the total duration of calls received with any SIM card that you have
used with the communicator.
Dialled calls’ duration (Menu 2-5-4)
Shows the total duration of calls made with any SIM card that you have
used with the communicator.
Clear timers (Menu 2-5-5)
Resets all timers. There is no way to undo the reset operation.
Show call costs (Menu 2-6)
This network service allows you to check various call costs. The costs are
shown in charging units or units of currency that you have set in Menu 2-7-2.
The call cost is shown for each SIM card separately. For these settings you
need the PIN2 code. Contact your service provider for more information.
Last call cost (Menu 2-6-1)
Shows the cost of the last, or current, call.
All calls’ cost (Menu 2-6-2)
Shows the total cost of all calls made with the current SIM card.
Note: The actual time invoiced for
calls and services by your service
provider may vary, depending upon
network features, rounding-off for
billing, taxes and so forth.
Um_spock3.bk Page 143 Thursday, June 1, 2000 10:11 AM
144
©2000 Nokia Mobile Phones. All rights reserved.
Clear counters (Menu 2-6-3)
Resets all cost counters. Resetting requires the PIN2 code. This service is
not available with SIM cards that do not support the PIN2 code. There is no
way to undo the reset operation.
Call cost settings (Menu 2-7)
Call costs’ limit (Menu 2-7-1)
This function allows you to limit the total costs of outgoing calls to a
specified number of charging units or units of the currency that you have
set in Menu 2-7-2. For this service you need the PIN2 code.
Changing the call cost limit also requires the PIN2 code. To turn the limit on,
select On. Key in the cost limit in charging units or currency units. If you define
the limit in currency units, you can press
or
to insert a decimal point.
After the limit has been turned on, the number of the remaining units is
shown on the display when in idle mode. When all units have been used, no
calls can be made.
To turn the limit off, select Off.
Show costs in (Menu 2-7-2)
You may select whether the call costs and call cost limits will be displayed
in currency or charging units. Contact your network operator for the prices
of charging units. Changing the call cost unit requires the PIN2 code.
To show the limits in currency units, select Currency, or Units to show the
limits in charging units. If you selected Currency, key in the charging unit
price. Use
or
to insert a decimal point. Next, enter the currency name.