Digital camera connectivity
The Digital camera connectivity application enables you to transfer images
between your communicator and a digital still camera or another
communicator via the infrared connection.
When you start the application, press Image list to open a list of the images in
the Downloaded files folder. However, you can only select image files with the
extensions UPF or JPG.
To transfer images from another device to the communicator
The connection to a digital camera or another communicator is always
established by the receiving communicator.
1 Make sure that the infrared port of your communicator faces the infrared
port of the other device.
2 Open the Digital camera connectivity application and press Image list.
3 Press Receive to start transferring the selected UPF images from the other
device to your communicator.
To transfer images from the communicator to another device
1 Open the Digital camera connectivity application and press Image list.
2 Select the UPF image(s) you want to transfer.
3 Make sure that the infrared port of your communicator faces the infrared
port of the other device, and press Send.
To rename the selected image, press Rename and write the new name in the
input field. Do not change the extension at the end of the name.
To use the Menu button
When you press the Menu button in the Image list, the following options
become available:
Open — Opens the image. You can then zoom in and out as well as rotate the
image.
Delete — Removes the image.
Convert to JPEG — Converts the selected image(s) from UPF to JPEG format.
Convert to UPF — Converts the selected image(s) from JPEG to UPF format.
Image information — Presents information about the image. You can also
view the information with the Ctrl-i key combination.
Note: The infrared protocol of the
digital camera must be IrTran-P in
order to be compatible with the
Nokia 9110i Communicator.
Um_spock3.bk Page 118 Thursday, June 1, 2000 10:11 AM
119
©2000 Nokia Mobile Phones. All rights reserved.